Shangu blower performance and precautions post-intallation

Shandong Zhangqiu Blower Mingtian Machinery Group said that our blowers have advantages in rotor gap control. Generally speaking, when operating under the same conditions, the three-blade rotor structure of the blower determines that the closing angle range during the gas transportation process is larger than that of the two-blade rotor. The blocking effect on leakage gas is also better than the latter, which improves the volumetric efficiency and improves vibration and noise. The counter-current compression of gas during the operation of the Roots blower will produce strong noise. When the rotor changes from two blades to three blades, the effective volume in the cavity also changes from two equal parts to three equal parts. The reduction of a single effective volume reduces the Holm resonance effect during equipment operation, improves air flow pulsation and vibration, and achieves noise reduction.

Shandong Zhangqiu Blower Mingtian's mechanical blowers have good performance. Compared with ordinary blowers, our equipment has blower parts loss. With correct operation and routine inspections, the blowers can run for a long time. Long service life. If the blower meets the factory specifications, it will have a long service life. Whether it is a Roots blower or a biogas blower, the parts that are prone to damage include belts, impellers, fuel tanks, etc. These parts will be used during the operation of the blower in the future. , regular inspections should be carried out to ensure service life.

 After the biogas fan is installed, the sealing around it should be checked. If there are any gaps, you can use solar panels or glass glue to seal them. After the installation is completed, check whether there are tools and debris inside the equipment, move the blower blades with your hands or levers, and check whether there are any excessive tightness or friction, and whether there are any objects that hinder the rotation. If the blower vibrates or the motor makes a buzzing sound or other abnormal phenomena during operation, stop the machine for inspection and wait for repairs before turning it back on.