Roots blowers have been widely used in different sectors such as sewage treatment, aquaculture, pneumatic conveying, cement, chemical industry, kilns and flour. The blower has simple structure and convenient manufacture, and is suitable for gas transmission and pressurization in low pressure occasions.

The blower has different applications in different fields. Specifically, it mainly has the following aspects:

1. In terms of wastewater treatment, Roots blowers are mainly used for aeration of industrial wastewater and domestic wastewater and other environmental protection projects to supply oxygen or use blowers to backwash filter materials, which are suitable for environmental engineering equipment industry.

2. Powder and granule transportation, using Roots blower to compress air to transport the powder and granule to the place of use. The powder and granule that can be transported mainly include plastic particles, PU particles, flour, sand filter materials and shells.

3. Roots blowers can also be used for air agitation in electroplating tanks. If the solution of electroplating tanks is to be evenly electroplated, blowers can be used for air agitation. This is mainly used in electroplating industry, electroplating machinery and equipment industry, printed circuit board industry and PCB factory.

4. Supplementation of oxygen in the breeding pond. Professional breeding ponds need to be supplemented with air to provide sufficient oxygen to the fish, so as not to cause unnecessary loss due to insufficient oxygen. At this time, oxygen can be delivered to the fish products through the operation of the blower.

5. The incinerator supplies air, and the combustion of the incinerator needs air supplement. When reducing the combustion, black smoke will be generated due to insufficient air, which will cause certain environmental problems. Roots blowers can supplement the air to the incinerator and reduce the harm to the environment.

6. In cement production, both shaft kiln calcination air supply and rotary kiln raw material conveying homogenization need to use Roots blowers. The use of shaft kiln to calcinate cement has the characteristics of low heat consumption, low investment and high efficiency. Roots blowers for cement kilns have hard exhaust characteristics and pressure adaptability, so the air supply for calcined cement is widely used. Due to the change of the material layer height in the kiln, the required air pressure often changes, and the higher the material layer in the kiln , The higher the required air pressure, the greater the required air volume, and the hard exhaust characteristics of Roots blowers can better meet this requirement

7. Roots blower for lime kiln: The pressure changes with the change of the system resistance, which is self-adaptive. It has the hard exhaust characteristic of forced air supply, that is, when the pressure changes, the flow rate changes little. The conveying medium does not contain oil. The traffic is classified in dense, wide coverage, and can be widely used by users. There are various sealing forms, including vertical, horizontal, positive pressure and negative pressure. Advanced structure, reliable operation, long service life, convenient operation and maintenance.